Copyright 2013 - CardonSales.com
All Rights Reserved.
"Dedicated to Customer Service"
Fire Box Flame Arrested G Burners
"O" Style & Box Style
End of Line Flame Arrester
Wenco ‘O’ Style Flame Arrested Burners (FAB’s) are used in lower BTU ratings,
generally .05 MM BTU to 3.5 MM BTU. Wenco Box Style Flame Arrested Burners
(FAB’s) are used in higher BTU ratings, generally 2.5 MM BTU to 10.0 MM BTU
applications. Construction for both styles is from Aluminum Sheet with
Aluminum Elements. Fire Box Flame Arrested Burners provide the heat source
for Oil & Gas Production Equipment such as Heater-Treaters, Line and Tank
Heaters and Glycol Dehydration Units. The BTU rating of the vessel typically
determines the size of the Fire Box Flame Arrested Burner.
WENCO Series 7500 Industrial Flame Arresters are designed to be installed in
vertical, end-of-line applications. these units allow for vapors to be vented to
the atmosphere while providing protection from outside ignition sources that
otherwise would ignite the flammable gases on the protected side of the Flame
Arrester. Units are constructed using a non-welded crimped metal ribbon
element offering protection & maximum flow for both group "D" and group "C"
gases. This series can be fabricated from Aluminum, Carbon Steel, or Stainless
Steel with an Aluminum or Stainless Steel Element. Sizes range from 1" to 12"